Skip to content
Three phase meter board beside an EV charger and air conditioning unit on a renovated Inner West home
Level 2 electrical

Three Phase Power Upgrade Inner West

Three phase power for EV chargers, ducted air conditioning, pools, workshops and big renovations.

Get a free quote

Takes a minute. A local level 2 electrician will call you back.

No obligation. Your details only go to one local level 2 electrician.

Most older Inner West homes run on single phase power, which was plenty for lights, a fridge and a hot water system. Modern houses ask a lot more. Ducted air conditioning, induction cooktops, EV chargers, pool pumps, home workshops and big solar and battery systems can all push a single phase supply to its limit. A three phase power upgrade gives you three supply phases instead of one, so the load is shared and nothing has to fight for capacity.

Signs you’ve outgrown single phase

  • Your electrician or air conditioning installer says the supply can’t take the new unit
  • You want a fast EV charger as well as ducted air
  • The main switch or service fuse trips when several big appliances run together
  • You’re adding a granny flat, a second kitchen or a large extension
  • You’re planning a large solar system and battery

Sometimes the real issue is old or undersized cable rather than the number of phases. In that case a consumer mains upgrade on single phase may be all you need. We’ll tell you honestly which one solves your problem.

How a three phase upgrade works

The first step is a connection application to Ausgrid. That confirms three phase is available from the mains in your street and whether any network work is needed. Most Inner West streets have three phase overhead mains, but some laneways and side streets carry only one or two phases, and that changes the plan.

Once approved, we install new three phase consumer mains from the point of attachment or boundary pit to the meter board. Your retailer arranges a three phase meter, and your electrician fits a three phase main switch and circuit protection in the switchboard. On connection day we lodge the notification, disconnect, connect the new mains to all three phases, balance and test, and reconnect. You get a certificate of compliance for the network side.

Overhead or underground?

If your supply comes in overhead, the new three phase service line attaches at the point of attachment like the old one. That can be a good moment to fix a low or badly placed bracket with a point of attachment upgrade. Many owners instead take the chance to go underground, running the new three phase mains in conduit from the street with an overhead to underground conversion.

Three phase on renovations and new builds

If you’re doing a knockdown rebuild or major renovation, plan the three phase supply early. Your builder will need site power through the build, which we can provide as a temporary builders supply, and the final three phase connection goes in once the meter board is installed. Getting the Ausgrid application in early saves waiting at the end.

Working with your electrician

We handle everything on the network side of the meter board. Your own electrician can do the switchboard and circuits, or we can recommend one. Either way we coordinate so the connection happens on the day the switchboard is ready.

How long it takes

The work on the day is usually a single visit. The time is in the approval: the Ausgrid connection application, any network work in the street, and the retailer’s meter change. Lodging the application early, before the air conditioning or EV charger is installed, means the supply is ready when the equipment arrives. We keep you updated on where the application is up to and book the connection as soon as it’s approved.

Get a quote

Talk to your local level 2 electrician Inner West team about three phase. We’ll check your supply, lodge the application and give you a fixed price. We do a lot of three phase work around level 2 electrician Five Dock, Concord and Drummoyne.

Updated

Three phase upgrades are priced on the Ausgrid connection requirements, the length and route of the new consumer mains, metering, and any switchboard work your electrician needs. We assess on site and give you a fixed price for our part.

What good three phase power upgrade looks like

Close-up of three phase power upgrade on a home in the Inner West area
What three phase power upgrade looks like up close on a typical Inner West area home.
Signs that three phase power upgrade needs attention
Typical signs that it needs attention.

Three Phase Power Upgrade questions in the Inner West

Something else on your mind? Call 0473 522 769 and ask.

Do I need three phase for an EV charger?

Not always. Many home chargers run fine on single phase. Three phase lets you charge faster and run the charger alongside ducted air conditioning, a pool and an induction cooktop without overloading the supply.

Is three phase available in my street?

Most Inner West streets have three phase mains on the poles, but not all. We check with Ausgrid as part of the application before any work starts.

Will my bills go up?

Three phase doesn't use more power on its own. Some retailers charge a different supply rate for three phase meters, so it's worth checking your plan.

Three Phase Power Upgrade in the Inner West: step by step

  1. Check your loadWe look at what you want to run, your existing supply and whether three phase is the right answer.
  2. Apply to AusgridWe lodge the connection application so Ausgrid can confirm three phase is available at your street.
  3. New mains and meteringWe install three phase consumer mains and arrange the meter change with your retailer.
  4. Connect and certifyWe connect to the network, test each phase and give you the certificate of compliance.

Need a Level 2 electrician in the Inner West?

📞 Call now Free quote