Skip to content
Meter box on a terrace verandah with new consumer mains and old VIR cable removed
Inner West guide

Do I need a level 2 electrician? What Level 2 work covers in the Inner West

The difference between a Level 2 electrician and a regular electrician, the jobs only a Level 2 can do, and how to tell which one you need.

Get a free quote

Takes a minute. A local level 2 electrician will call you back.

No obligation. Your details only go to one local level 2 electrician.

Most electrical work in your home is done by a licensed electrician: new power points, lights, switchboards, appliances. But some of the work around your supply, between the street and your meter board, can’t be done by any electrician. It needs a Level 2 electrician. If you’ve been told you need one and you’re not sure why, this guide explains what Level 2 work is, when you need it, and how it works on the Ausgrid network that supplies the Inner West.

The short answer

You need a Level 2 electrician for work on the part of your electricity supply that connects to the network. That’s usually:

  • The service line from the street pole or pit to your house
  • The point of attachment where an overhead line meets the house
  • The consumer mains from the point of attachment to the meter board
  • Disconnecting and reconnecting your supply from the network
  • Private power poles on your property
  • Metering connections

A regular electrician works on the installation inside your home, from the main switch onwards.

Why Level 2 is separate

The cables that bring power into your home stay live even when your main switch is off. To work on them safely, someone has to isolate the supply on the network side, at the pole, pit or point of attachment. In NSW that work falls under the Accredited Service Provider scheme, and the people accredited to do it on residential supplies are commonly called Level 2 electricians.

Accredited Service Providers come in three levels:

  • Level 1 builds and maintains the network itself, such as street mains and substations.
  • Level 2 does service work: connecting and disconnecting supplies, overhead and underground service lines, and metering.
  • Level 3 designs network connections and extensions.

Within Level 2, work is split into classes: Class 2A for disconnecting and reconnecting at the connection point, Class 2B for underground services, Class 2C for overhead services and Class 2D for energising service equipment such as meters. These replaced the old Category 1 to 4 labels you may still hear. A Level 2 provider must be accredited, and each worker authorised by Ausgrid, for the class of work they do.

Jobs that need a Level 2 electrician

Here are the jobs we’re most often called for in the Inner West, and why each one is Level 2:

Consumer mains upgrades. Old VIR or undersized mains have to be replaced from the network side. Read our guide to VIR consumer mains to see why this is common in terraces. See our consumer mains upgrade page for the service.

Disconnections for renovations. Re-roofing, rendering a facade, moving a meter box or demolishing a house all need the supply isolated at the network. That’s a power disconnection and reconnection.

Moving or raising the point of attachment. Second storeys, new roofs and carports often put the overhead line in the wrong place or too low.

Going underground. Replacing an overhead service line with an underground cable from the street is an overhead to underground conversion.

Private poles. Replacing or removing a rotten pole in your yard or laneway is private power pole replacement.

Three phase upgrades. Changing the supply from single phase to three phase means new mains and a network connection.

Temporary site power. Builders need a temporary supply connected to the network.

Emergencies. Fallen service lines, pulled-off brackets and blown service fuses.

Jobs a regular electrician can do

You don’t need a Level 2 for:

  • Power points, lights, fans and smoke alarms
  • Replacing a switchboard (though the supply may need to be disconnected first)
  • Rewiring circuits inside the house
  • Installing an EV charger or air conditioner on the existing supply
  • Safety switch upgrades

Often a job needs both. A switchboard replacement, for example, is the electrician’s work, but if the supply needs to be disconnected and the consumer mains replaced, that’s ours. We coordinate with your electrician so both halves happen on the same day.

How Level 2 work happens on the Ausgrid network

Ausgrid owns and runs the network that supplies the Inner West: the street mains, poles, pits and substations. Before we do work on the connection, we lodge the required notification with Ausgrid. For some jobs, such as three phase upgrades or new connections, a connection application is needed first, so Ausgrid can confirm what’s available in your street.

When the work is complete, we give you a certificate of compliance. Keep it with your house records, because you may need it when selling, for insurance, or if you add solar or a battery later.

The Inner West factor

Some areas of Sydney need Level 2 work more than others, and the Inner West is one of them. The reasons are mostly about age and density:

  • Old mains. Many homes still have consumer mains from the 1940s to 1960s.
  • Overhead supply. Most streets and laneways are still overhead, with service lines crossing yards, footpaths and lanes.
  • Tight sites. Small blocks, narrow side passages and rear lanes mean lines get hit by trucks, trees and scaffolding.
  • Renovations. Second storeys and rear extensions on terraces and cottages nearly always affect the supply.
  • Shared supplies. Some laneway terraces share a pole or service line, so one job can affect neighbours.

How to tell which one to call

Ask yourself where the problem or the work is:

  • Outside the meter board, towards the street? Call a Level 2 electrician.
  • Inside the meter board or the house? Call a licensed electrician.
  • Both, or not sure? Call us. We’ll tell you straight, and if you don’t need a Level 2, we’ll say so.

Talk to a local Level 2

The Inner West level 2 electrician team does Level 2 work every day from Balmain to Strathfield. Call for a free quote, or for urgent help with a fallen line or no power, use our 24/7 line. We’re regularly in level 2 electrician Newtown and Enmore.

Updated

Do I need a level 2 electrician? What Level 2 work covers in the Inner West: common questions

Something else on your mind? Call 0473 522 769 and ask.

Is a Level 2 electrician more expensive?

Not necessarily. Level 2 work is a different scope rather than a premium version of normal electrical work. The price depends on the job, and we give a fixed price before starting.

Can a Level 2 electrician also do normal electrical work?

Level 2 electricians are licensed electricians, so they can do normal work too. Our focus is the network side of the supply, and we coordinate with your own electrician for work inside the house.

How do I check someone is accredited?

Ask for their Accredited Service Provider details. Accredited Level 2 providers can lodge notifications with the network and issue a certificate of compliance for the work.

Need a Level 2 electrician in the Inner West?

📞 Call now Free quote